Figure 2-5. 48Iq Rear Panel - Thermo Scientific 48iQ Instruction Manual

Thermo Scientific
5. If the optional zero/span solenoid valves are installed, connect a source
of CO-free air to the ZERO IN bulkhead, and connect a source of CO
span gas to the SPAN bulkhead.
6. Connect a suitable recording device to the rear panel connector. For
detailed information about connecting to the instrument, refer to:
"Connecting External
Communications >
on page 3-59.
7. Plug the instrument into an outlet of the appropriate voltage and
frequency.
Icon Here The 48iQ is supplied with a three-wire grounding cord. Under no
circumstances should this grounding system be defeated.
Figure 2–5. 48iQ Rear Panel
Devices" on page 9-1
"Analog I/O" on page 3-57, and
Installation and Setup
Setup Procedure
"Digital I/O"
▲
48iQ Instruction Manual 2-7