Conn - Cabletron Systems 2H23-50R User Manual

Installation
Rack mounting the 2H23-50R or 2H33-37R involves the following:
• Attaching the strain-relief bracket
• Rack mounting the device (attaching the mounting brackets and
fastening the device to the rack)
Attaching the Strain-Relief Bracket
Attach the strain-relief bracket to the front of the device as follows:
1. Locate the strain-relief bracket and four 8-32 x 3/8-inch pan-head
screws in the rackmount kit.
Do not attempt to attach the strain-relief bracket with screws
!
other than the 8-32 x 3/8-inch screws included with the
CAUTION
2H23-50R. Use of longer screws will damage the unit.
2. Attach the strain-relief bracket to the bottom of the device using the
four 8-32 x 3/8-inch pan-head screws
6
Figure 3-2 Attaching the Strain-Relief Bracket
2H23-50R/2H33-37R User's Guide
Screws (4)
Strain-Relief Bracket
5 2

CONN

12
4 CONN
12
(Figure
COM
1 CONN
CPU
PWR
1 12 1
3 CONN
100
1 CONN
2 CONN
1 12 1 3 CONN
4 CONN
Installing the Device
3-2).
2H23-50R
RESET
10
1 CONN
2 CONN
3 CONN
4 CONN
22862-47
3-5