Enabling/Disabling Ip Fragmentation - Cabletron Systems 2H23-50R User Manual

Chapter 5: Local Management

5.7.12 Enabling/Disabling IP Fragmentation

To enable or disable IP Fragmentation, proceed as follows:
If the 2H33-37R is being bridged to an FDDI ring (for example,
!
via an optional HSIM-F6), enable IP Fragmentation. If it is
CAUTION
disabled, all FDDI frames that exceed the maximum Ethernet
frame size are discarded.
1. Use the arrow keys to highlight the IP Fragmentation field.
2. Press the SPACE bar to choose either ENABLED or DISABLED.
3. Use the arrow keys to highlight the SAVE command.
4. Press ENTER. The message "SAVED OK" displays at the top of the
screen.
5-32 2H23-50R/2H33-37R User's Guide