Displaying Rmon Statistics; Using The Clear Counters Command - Cabletron Systems 2H23-50R User Manual

512 – 1023 Octets (Read-only)
Displays the total number of frames, including bad frames, received that
were between 512 and 1023 bytes in length (excluding framing bits, but
including FCS bytes).
1024 – 1518 Octets (Read-only)
Displays the total number of frames, including bad frames, received that
were between 1024 and 1518 bytes in length (excluding framing bits, but
including FCS bytes).
Index [ nn ] (Command)
This command is used to enter an index number for viewing statistics. For
instructions on how to use this command, refer to
CLEAR COUNTERS (Command)
This command is used to reset all statistic counters to zero. For details on
how to use this command, refer to

5.25.1 Displaying RMON Statistics

To display the statistics for any index, proceed as follows:
1. Use the arrow keys to highlight the Index [nn] field at the bottom of
the screen.
2. Press the SPACE bar to increment (or press the DEL [delete] key to
decrement) the index number.
3. Press ENTER (neither the RMON Index # field nor the statistics
change until ENTER is pressed).

5.25.2 Using the Clear Counters Command

To reset all the statistics counters of the selected interface to zero, perform
the following steps:
1. Use the arrow keys to highlight the CLEAR COUNTERS field.
2. Press ENTER, the counters for the selected index are reset to zero.
2H23-50R/2H33-37R User's Guide
RMON Statistics Screen
Section
Section 5.25.2.
5.25.1.
5-91