Chapter 5: Local Management
5.9
SNMP TRAPS SCREEN
Since the 2H23-50R or 2H33-37R is an SNMP compliant device, it can
send messages to multiple Network Management Stations to alert users of
status changes. The SNMP Traps screen is shown in
To access the SNMP Traps screen from the Device Configuration Menu
screen, use the arrow keys to highlight the SNMP TRAPS menu item and
press ENTER. The SNMP Traps screen displays.
Event Message Line
Device Type: 2H23-50R
Trap Destination
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
SAVE
The following explains each field of the SNMP Traps screen.
Trap Destination (Modifiable)
Indicates the IP address of the workstation to receive trap alarms. Up to
eight different destinations can be defined.
Trap Community Name (Modifiable)
Displays the Community Name included in the trap message sent to the
Network Management Station with the associated IP address.
5-36
2H23-50R LOCAL MANAGEMENT
SNMP Traps
Trap Community Name
public
public
public
public
public
public
public
public
EXIT
Figure 5-16 SNMP Traps Screen
Figure
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Enable Traps
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
[NO]
2H23-50R/2H33-37R User's Guide
5-16.
XX.XX.XX
RETURN
22861-17