Repeater Statistics Screen - Cabletron Systems 2H23-50R User Manual

Chapter 5: Local Management
5.26

REPEATER STATISTICS SCREEN

Operating statistics for each repeater port (1 through 48 for the
2H23-50R, or 1 through 36 for the 2H33-37R) and its corresponding
network interface are displayed via the Repeater Statistics screen shown
in Figure 5-33.
To access the Repeater Statistics screen, use the arrow keys to highlight
the REPEATER STATISTICS menu item on the Device Statistics
Menu screen and press ENTER. The Repeater Statistics screen displays.
Event Message Line
Device Name: 2H23-50R
Bytes Received:
Frames received:
Total Errors:
OOW Collisions:
CRC Errors:
Alignment Errors:
Undersize Packets:
Oversize Packets
Link Status:
Admin Status:
NETWORK #: xx
The following describes each field of the Repeater Statistics screen:
Network # (Read-Only)
Indicates the current network port (1 through 8, for the 2H23-50R or 1
through 6, for the 2H33-37R) for which statistics are displayed. This field
is automatically set by selecting a port number in the PORT # command
field at the bottom of the screen. For example, if 4 is selected in the PORT
# command field, the statistics for Network 4 (CONN 2, 100 Mbps
Network Port) displays along with the statistics for the selected port.
5-92
2H23-50R LOCAL MANAGEMENT
Network #: xx
Collisions:
Broadcasts
Multicasts:
PORT #: xx
Figure 5-33 Repeater Statistics Screen
Repeater Statistics
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
7500456
6789
0
0
0
0
0
0
0
0
0
Link
Enabled
CLEAR COUNTERS
2H23-50R/2H33-37R User's Guide
XX.XX.XX
Port #: xx
7500456
6789
0
0
0
0
0
0
0
0
0
No Link
Disabled
RETURN
EXIT
22862-29