Cabletron Systems 2H23-50R User Manual page 79

If the COM port is reconfigured without a valid IP address set
!
on the device, the message shown in
CAUTION
Do not continue unless the outcome of the action is fully
understood. If the WARNING screen displays, proceed to
step 4. Otherwise, proceed to step 5.
THE COM PORT HAS BEEN RECONFIGURED AND THERE IS NO IP
ADDRESS SET FOR THIS DEVICE. YOU WILL NO LONGER BE ABLE
TO MANAGE THIS DEVICE. DO YOU STILL WISH TO RECONFIGURE
THIS COM PORT?
4. Use the arrow keys to highlight YES. Press ENTER.
5. If the port was ENABLED, proceed to step 6. If the port was
DISABLED, use the arrow keys to highlight SAVE at the bottom of
the screen, then press ENTER.
Exiting without saving causes the message "NOT SAVED --
NOTE
PRESS SAVE TO KEEP CHANGES" to display. Exiting without
saving causes all edits to be lost.
6. When the message "SAVED OK" displays, the edits you made are
saved.
2H23-50R/2H33-37R User's Guide
YES
Figure 5-13 COM Port Warning Screen
General Configuration Screen
WARNING
Figure 5-13 displays.
NO
17421-52
5-29