Setting The Threshold; Setting The Reset Peak - Cabletron Systems 2H23-50R User Manual

5.16.1 Setting the Threshold

To set the Threshold, proceed as follows:
1. Use the arrow keys to highlight the Threshold field for the selected
port.
2. Type in the numbers for the desired limit. Only enter values in
increments of ten (for example; 10, 20, 30, etc.).
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message "SAVED OK" displays.

5.16.2 Setting the Reset Peak

To set the Reset Peak field to YES or NO, proceed as follows:
1. Use the arrow keys to highlight the Reset Peak field for the selected
port.
2. Press the SPACE bar to select YES or NO.
3. Use the arrow keys to highlight the SAVE command at the bottom of
the screen.
4. Press ENTER. The message "SAVED OK" displays and the Time
Since Peak field is also reset.
2H23-50R/2H33-37R User's Guide
Broadcast Suppression Screen
5-63