Chapter 5: Local Management
The following explains each field of the Broadcast Suppression screen:
PORT # (Read-only)
Identifies the number of the switched port. Ten ports are displayed in a
2H23-50R and seven ports in a 2H33-37R.
organization.
2H23-50R
CONN 1 = Network Port 1, 10 Mbps
Network Port 2, 100 Mbps
CONN 2 = Network Port 3, 10 Mbps
Network Port 4, 100 Mbps
CONN 3 = Network Port 5, 10 Mbps
Network Port 6, 100 Mbps
CONN 4 = Network Port 7, 10 Mbps
Network Port 8, 100 Mbps
Fast Ethernet Slot 5 = Port 9
Fast Ethernet Slot 6 = Port 10
Total RX (Read-Only)
Displays the total number of broadcast frames received.
Peak Rate (Read-Only)
Displays the highest number of broadcast frames received in a one second
interval.
Time Since Peak (Read-Only)
Displays the time since peak rate was achieved.
Threshold (Modifiable)
Allows the user to set the desired limit of receive broadcast frames that
will be forwarded per port per second.
Reset Peak (Toggle)
Enables the user to reset the Peak Rate. Resetting the Peak Rate also
resets the Time Since Peak field. The Reset Peak field toggles between
YES and NO.
5-62
Table 5-7 CONN/Port Organization
Table 5-6
2H33-37R
CONN 1 = Network Port 1, 10 Mbps
Network Port 2, 100 Mbps
CONN 2 = Network Port 3, 10 Mbps
Network Port 4, 100 Mbps
CONN 3 = Network Port 5, 10 Mbps
Network Port 6, 100 Mbps
HSIM = Port 7
2H23-50R/2H33-37R User's Guide
shows the port