Cabletron Systems 2H23-50R User Manual page 62

Chapter 5: Local Management
Using the RETURN Command
To exit LM using the RETURN command, proceed as follows:
1. Use the arrow keys to highlight the RETURN command at the bottom
of the Local Management screen.
2. Press ENTER. The previous screen in the Local Management
hierarchy displays.
The user can also exit Local Management screens by pressing
NOTE
ESC twice. This exit method does not warn about unsaved
changes and all unsaved changes are lost.
3. Exit from Local Management by repeating steps 1 and 2 until the
Device Menu screen displays.
4. To end the LM session, use the arrow keys to highlight the RETURN
command at the bottom of the Device Menu screen.
5. Press ENTER. The Local Management Password screen displays and
the session ends.
5-12 2H23-50R/2H33-37R User's Guide