Accessing Local Management - Cabletron Systems 2H23-50R User Manual

Chapter 5: Local Management
5.4

ACCESSING LOCAL MANAGEMENT

Access to Local Management is controlled through the Local
Management Password screen shown in
connection is made to the 2H23-50R or 2H33-37R the Local
Management Password screen displays. Before continuing, the user must
enter a password (community name) which is compared to the previously
stored passwords. The level of access allowed the user depends on the
password. To set or change passwords, refer to
steps describe the procedure to access Local Management.
1. Turn on the terminal. Press ENTER (this may take up to four times,
because the COM port auto-senses the baud rate of the terminal) until
the 2H23-50R or 2H33-37R Local Management Password screen
displays. It is the automatic line speed seeking feature of the port that
makes it necessary at times to press ENTER several times.
Event Message Line
Figure 5-3 Local Management Password Screen
2. Enter the Password and press ENTER. The default super-user access
password is "public" or press ENTER.
5-8
2H23-50 LOCAL MANAGEMENT
CABLETRON Systems, Incorporated
P.O.Box 5005
Rochester, NH 03866-5005 USA
(603) 332-9400
(c) Copyright CABLETRON Systems, Inc, 1998
Device Serial Number:
Device Hardware Revision:
Device Firmware Revision:
Device BOOTPROM Revision:
Enter Password:
2H23-50R/2H33-37R User's Guide
Figure 5-3. Whenever a
Section 5.8. The following
XXXXXXXXX
XX
X.XX.XX
X.XX.XX
22861-12