Setting The Ip Address - Cabletron Systems 2H23-50R User Manual

5.7.1

Setting the IP Address

To set the IP address, perform the following steps:
1. Use the arrow keys to highlight the IP Address field.
2. Enter the IP address into this field using Dotted Decimal Notation
(DDN) format.
For example: 134.141.79.120
3. Press ENTER. If the IP address is a valid format, the cursor returns to
the beginning of the IP address field. If the entry is not valid, the screen
displays the message "INVALID IP ADDRESS OR FORMAT
ENTERED". Local Management does not alter the current value and
refreshes the IP address field with the previous value.
4. Use the arrow keys to highlight the SAVE command, then press
ENTER. The warning screen shown in
YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION
ITEMS THAT REQUIRE RESETTING THIS DEVICE.
ARE YOU SURE YOU WANT TO CONTINUE?
5. Use the arrow keys to highlight the YES command, then press
ENTER. The changes are saved and the device reboots.
2H23-50R/2H33-37R User's Guide
YES
Figure 5-10 Configuration Warning Screen
General Configuration Screen
Figure 5-10
WARNING!
displays.
NO
19601-84
5-21