Cabletron Systems 2H23-50R User Manual page 126

Chapter 5: Local Management
The following section defines the fields on the Port Level Security
Configuration screen.
Port (Read-only)
Indicates the repeater port on the connector selected in the
CONNECTOR # field. Refer to
relationship on the device.
Table 5-11 CONN/Repeater Port Relationship
2H23-50R or 6H123-50
CONN 1 = Repeater ports 1 – 12
CONN 2 = Repeater ports 13 – 24
CONN 3 = Repeater ports 25 – 36
CONN 4 = Repeater ports 37 – 48
Network (Read-only)
Indicates the network to which the port is currently attached.
shows the association between the CONN and Network on the device.
2H23-50R or 6H123-50
CONN 1 = Network 1, 10 Mbps
Network 2, 100 Mbps
CONN 2 = Network 3, 10 Mbps
Network 4, 100 Mbps
CONN 3 = Network 5, 10 Mbps
Network 6, 100 Mbps
CONN 3 = Network 7, 10 Mbps
Network 8, 100 Mbps
5-76
Table 5-11
Table 5-12 CONN/Network Organization
for the connector/repeater port
2H33-37R or 6H133-37
CONN 1 = Repeater ports 1 – 12
CONN 2 = Repeater ports 13 – 24
CONN 3 = Repeater ports 25 – 36
2H33-37R or 6H133-37
CONN 1 = Network 1, 10 Mbps
Network 2, 100 Mbps
CONN 2 = Network 3, 10 Mbps
Network 4, 100 Mbps
CONN 3 = Network 5, 10 Mbps
Network 6, 100 Mbps
HSIM = Port 7
2H23-50R/2H33-37R User's Guide
Table 5-12