Chapter 3: Installation
3.2
UNPACKING THE DEVICE
To unpack the device and verify the contents of the shipment, proceed as
follows:
1.
Open the carton and remove the packing material.
2.
Verify the contents of the carton as listed in
Item
2H23-50R or 2H33-37R
Antistatic Wrist Strap
Console Cable Kit
Rackmount Kit
Strain-Relief Bracket
Release Notes
Power Cord
Manual Accessory Kit
3.
Remove the black and yellow tape seal on the non-conductive bag to
remove the device.
4.
Perform a visual inspection of the device for any signs of physical
damage. If there are any items missing or damaged, contact the
Cabletron Systems Global Call Center as described in
3.3
INSTALLING OPTIONS
Install any optional equipment before proceeding to
NOTE
Section
If the 2H23-50R is to be installed with an optional Fast Ethernet Interface
Module, refer to
2H33-37R is to be installed with an optional HSIM, refer to the
installation instructions in the associated HSIM user's guide.
3-2
Table 3-1 Contents of Carton
3.4.
Appendix C
for installation instructions. If the
Table
2H23-50R/2H33-37R User's Guide
3-1.
Quantity
1
1
1
1
1
1
2
1
Section
1.6.