Interface Statistics Screen - Cabletron Systems 2H23-50R User Manual

CLEAR COUNTERS (Command)
This command clears all the counters of the displayed ports to zero. To
clear the counters, use the arrow keys to highlight CLEAR COUNTERS
at the bottom of the screen, then press ENTER.
5.24

INTERFACE STATISTICS SCREEN

The Interface Statistics screen,
statistics for all the 2H23-50R or 2H33-37R interfaces with the exception
of an installed HSIM in a 2H33-37R.
Cabletron Systems HSIMs gather their own statistics that may
NOTE
be viewed via the Local Management screens of the applicable
HSIM. Refer to your HSIM documentation for information on
how to access these screens.
To access the Interface Statistics screen, use the arrow keys to highlight
the INTERFACE STATISTICS menu item on the Device Statistics
Menu screen and press ENTER. The Interface Statistics screen displays.
Event Message Line
Device Typee: 2H23-50R
Interface: 1
InOctets:
InUnicast:
InNonUnicast:
InDiscards:
InErrors:
InUnknownProtos:
OutOctets:
OutUnicast:
OutNonUnicast:
OutDiscards:
OutErrors:
OutQLen:
Interface: [ nn ]
2H23-50R/2H33-37R User's Guide
Figure
2H23-50R LOCAL MANAGEMENT
Interface Statistics
Name: Ethernet Frontpanel
7500456
6789
0
0
0
0
0
0
0
0
0
0
CLEAR COUNTERS
Figure 5-31 Interface Statistics Screen
Interface Statistics Screen
5-31, is used to gather MIB-II
Firmware Revision:
BOOTPROM Revision: XX.XX.XX
Address: 00-00-00-00-00-00
Last Change: xx days 00:00:00
Admin Status: Up
Oper Status: Down
MTU: 1514
Speed: 100000000
Link Status: No Link
Duplex Mode: Standard
EXIT
XX.XX.XX
RETURN
22861_64
5-83