The Snmp Community Names Screen - Cabletron Systems TRMIM 24A TRMIM-24A User Manual

5.3.2 The SNMP Community Names Screen

The SNMP Community Names screen lets you set community names.
Community names serve two purposes; they act as passwords to Local
Management and they are agents of security control to your TRXI. You
control TRXI access by establishing up to three levels of security
authorization (Read Only, Read-Write, and Super-User). Only a user
with Super-User access can change the device IP address and the
community names.
Caution: Community Names are passwords to Local Management.
Remember your Community Name.
Local Management passwords accorded Read-Only and Read-Write
access privileges are not allowed editing capabilities to some fields. In
this case, the message "AUTHORIZATION PROHIBITS ACCESS"
appears. Figure 5-6 shows the SNMP Community Names screen.
TRXI LOCAL MANAGEMENT
Component Name
TRXI Chassis MGR
TRXI Chassis MGR
TRXI Chassis MGR
Figure 5-6. SNMP Community Names Screen
SNMP COMMUNITY NAMES
Community Name
SAVE
LOCAL MANAGEMENT
Flash Image Version: X.XX.XX
Access Policy
public READ-ONLY
ring1 READ-WRITE
<CR> SUPER-USER
RETURN
Page 5-13