Setting The System Time; Setting The Host Ip Address - Cabletron Systems MicroMMAC 22ES User Manual

4.3 SETTING THE SYSTEM TIME

To set the system clock, perform the following steps:
1. Use the arrow keys to highlight the System Time field.
2. Enter the time in a 24-hour format, HH:MM:SS.
When entering the time in the system time field, you do not
NOTE
need to add separators between hours, minutes, and seconds,
as long as each entry uses two decimal numbers. For example,
to set the time to 6:45 a.m., type "064500" in the System Time
field.
3. Press ENTER to set the system clock.
4. Use the arrow keys to highlight the SAVE command field at the
bottom of the screen and press ENTER.
If the time entered was a valid format, the Event Message field at the
top of the screen displays "SAVED OK." If the entry was not valid,
Local Management does not alter the current value and refreshes the
System Time field with the previous value.

4.4 SETTING THE HOST IP ADDRESS

To set the host IP address, perform the following steps:
1. Use the arrow keys to highlight the Host IP Address field.
2. Enter the IP address using Decimal Dotted Notation (DDN) format.
For example: 134.141.25.17
3. Press ENTER. If the IP address entered was a valid format, the cursor
returns to the beginning of the Host IP Address field. If the entry was
not valid, the Event Message field displays "INVALID IP ADDRESS
OR FORMAT ENTERED." Local Management does not alter the
current value and refreshes the Host IP Address field with the previous
value.
4. Use the arrow keys to highlight the SAVE command field.
5. Press ENTER. The Event Message field at the top of the screen
displays "SAVED OK."
MicroMMAC Local Management User's Guide
Setting the System Time
Page 4-5