Setting The Subnet Mask - Cabletron Systems 2E48-27R User Manual

4. Use the arrow keys to highlight the SAVE command, then press
ENTER. The warning screen shown in
YOU HAVE ELECTED TO SAVE ONE OR MORE CONFIGURATION
ITEMS THAT REQUIRE RESETTING THIS MODULE.
ARE YOU SURE YOU WANT TO CONTINUE?
5. Use the arrow keys to highlight the YES command, then press
ENTER. The changes are saved and the device reboots.
5.7.2

Setting the Subnet Mask

If the management workstation that is to receive SNMP traps from the
2E4X-27R is located on a separate subnet, the subnet mask for the
2E4X-27R may need to be changed from its default.
To change the subnet mask from its default, perform the following steps:
1. Use the arrow keys to highlight the Subnet Mask field.
2. Enter the subnet mask into this field using Dotted Decimal Notation
(DDN) format.
For example: 255.255.0.0
2E48-27R/2E49-27R User's Guide
YES
Figure 5-10 Configuration Warning Screen
General Configuration Screen
Figure 5-11
WARNING!
displays.
NO
19601-84
5-21