Using Fcselect And Disk Utilities; Starting Fcselect - Adaptec 9210LP User Reference

Adaptec Fibre Card 9210LP User's Reference
Using FCSelect and Disk
Utilities
The Adaptec Fibre Card 9210LP has the onboard FCSelect
configuration utility which allows you to change Adaptec Fibre
Card 9210LP options without opening the computer chassis or
handling the card. FCSelect also includes disk utilities to list the
devices connected to the Adaptec Fibre Card 9210LP.
The following table lists the available and default settings for each
FCSelect configuration option.
FCSelect Configuration Options Available Settings
FC Card INT 13h support
FC Card Hard AL_PA
Device Scanning
Host Adapter Speed

Starting FCSelect

1
Turn or restart your system.
ON
During the startup process, pay careful attention to the
messages that appear on your screen.
2
When the following message appears on your screen, press the
Ctrl-A keys simultaneously (this message appears for only a
few seconds):
Press <Ctrl><A> for FCSelect (TM) Utility!
3
From the menu that appears, use the arrow keys to move the
cursor to the option you want to select, (Configure/View FC
Card Settings, or run FC Disk Utilities), then press Enter.
Note: You can return to the previous menu at any time by
pressing Esc.
14
Enabled/Disabled
All valid AL_PA IDs
Backward/Forward
Auto Negotiation
2 Gigabit
1 Gigabit
Default Setting
Disabled
0x01
Backward
1 Gigabit