Repetition Angle Measurement (Rep) - Topcon GTS-600 Series Instruction Manual

4.5 Repetition Angle Measurement (REP)

Repetitionn Angle Measurement program accumulates horizontal angles and shows the total angle (Ht)
and the mean (Hm) of all the angles measured. The progam also keeps track of the amount of complete
sets of horizontal angles measured.
Operating procedure
1
Press [F6](MORE) key from programs menu
to get to the next page of programs.
2
Press [F1](REP) key.
3
Collimate the first target A.
4
Press [F2](0SET) and [F5](YES).
5
Collimate the second target B using the
horizontal motion clamp and the horizontal
tangent screw.
6
Press [F6](HOLD) key.
7
Recollimte the first target A using the
horizontal motion clamp and the horizontal
tangent screw.
8
Press [F5](REL) key.
Operation
Programs
F1 BS
F2 STORE
F3 REM
F4 MLM
[F6] Programs
F1 REP
F2 LAYOUT
F3 LINE
F4 LOADER
[F1]
Repetition Angle
Ht:
Hm:
EXIT
Collimate
Repetition Angle
A
Ht:
Hm:
EXIT
[F2] Repetition Angle
[F5]
Ht:
Hm:
EXIT
Collimate Repetition Angle
B
Ht: 120 ° 30'40"
Hm: 120°30'40"
EXIT
[F6] Repetition Angle
Ht: 120 ° 30'40"
Hm: 120°30'40"
EXIT
Recolli- Repetition Angle
mate A
Ht: 120°30'40"
Hm: 120°30'40"
[F5]
EXIT
4-10
4 PROGRAM MODE
Display
p 4/8
p
p
p MORE
p 8/8
p
p
p MORE
CNT[ 0]
160 ° 30'40"
0SET REL HOLD
CNT[ 0]
189 ° 45'10"
0SET REL HOLD
CNT[ 0]
0 ° 00'00"
0SET REL HOLD
CNT[ 1]
0SET REL HOLD
CNT[ 1]
0SET REL HOLD
CNT[ 1]
0SET REL HOLD