Twist-N-Ride 4 Slide Assembly; Install Window Braces - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Twist-N-Ride 4 Slide Assembly

Step 69: Install Window Braces
A: From inside the tower place 2 (6031) Window Braces side by side on each side of the Back Wall making sure
that there is a 9-1/2" (241.3mm) opening in the center. Attach (6031) Window Braces using 4 (S20) #8 x 1-3/8"
Wood Screws per board. (Fig. 69.1 & 69.2)
Fig. 69.1
Back Wall
6031
Wood Parts
4 x Window Brace 15.9 x 72.6 x 996.9mm
6031
x 4
S20 per board
9-1/2"
(241.3mm)
16 x
Fig. 69.2
6028
6034
Hardware
#8 x 1-3/8" Wood Screw
S20
129