Wall Top Assembly - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 44: Wall Top Assembly
Part 1
A: Making sure that assemblies are square, position the Left Wall Assembly onto the lower left assembly as
shown in (fig. 44.1 & 44.2). Attach (6002) Long Post to (6012) Short Post using 1 (H12) 1/4 x 3" Hex Bolt (with
lock washer, flat washer and t-nut). In the upper hole of (6026) Rock Rail, pre-drill with a 1/8" (3.2mm) drill bit
and install 1 (LS3) 1/4 x 3" Lag Bolt (with flat washer). Install 1 (H3) 1/4 x 2-1/2" Hex Bolt (with flat washer, lock
washer and t-nut) in the (6000) Upper Post. (fig. 44.1 & 44.2)
Fig. 44.1
6000
6026
flat washer
lock washer
H3
1/4" t-nut
Fig. 44.2
flat
washer
LS3
1 x
H12
1 x
LS3
1 x
H3
6000
1/4"
t-nut
6026
Hardware
1/4 x 3" Hex Bolt (with lock washer, flat washer and t-nut)
¼ x 3" Lag Bolt (with flat washer)
¼ x 2-1/2" Hex Bolt (with flat washer, lock washer and t-nut)
92
Left Wall Top
6012
flat
washer
lock
washer
H12
6002