Attach Floor Boards - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 58: Attach Floor Boards
A: Flip the frame assembly so that it's right side up. (fig. 58.1)
B: Place 1 (9092) Floor Board at the end of the tunnel frame so it's flush with the ends and the sides of the
(6035) Tunnel Side Joists and attach using 5 (S2) #8 x 1-1/2" Wood Screws. (fig. 58.1 and 58.2)
C: Place 1 (9087) Floor Board at the other end of the tunnel frame ensuring that it's flush with the ends and the
sides of the (6035) Tunnel Side Joists and attach using 5 (S2) #8 x 1-1/2" Wood Screws. (fig. 58.1 and 58.2)
D: Evenly space the remaining (9092) Floor Boards and attach all boards using 5 (S2) #8 x 1-1/2" Wood Screws
per board. (fig. 58.1 and 58.2)
Fig. 58.1
Flush
9092
x 14
Fig. 58.2
Wood Parts
14 x Floor Board 15.9 x 114.3 x 428.6mm
9092
1 x Floor Board 15.9 x 85.7 x 428.6mm
9087
14 wide & 1 narrow floor boards
1-1/5" WS's X75
Evenly Space
Hardware
75 x #8 x 1-1/2" Wood Screw
S2
110
x 5 per board
S2
Flush
9087