Attach Exit End Assembly To Adventure Tower - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 77: Attach Exit End Assembly to Adventure Tower
A: Fit the Exit End Assembly to the last Elbow Assembly by lining up the arrows on each assembly. Notice the
elbow orientation. (fig. 77.1). Attach with 6 (PB7) ¼ x 12.7mm Pan Bolts and Square Lock Nuts.
Fig. 77.1
Elbow
Assembly
Make sure arrows are aligned
139
Exit Elbow
Assembly
Other Parts
6 x 1/4" x 12.7mm Pan Bolt
6 x 1/4" Square Lock Nut