Install Swing Brackets - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 59: Install Swing Brackets
A: From outside the tunnel assembly, measure 1-1/4" in from each end of the (6035) Tunnel Side Joists and
attach 4 Swing Brackets using 1 (G1) 5/16 x 1-1/2" Hex Bolt (with flat washer and lock washer) per bracket.
(fig. 59.1 and 59.2)
Fig. 59.1
Fig. 59.2
5/16 x 1-1/2" Hex Bolt X4 (washer & loc washer)
leave 1-1/4" to end of board
Swing
1-1/4" Brackets
Hardware
4 x 5/16 x 1-1/2" Hex Bolt
G1
(5/16" lock washer, 5/16" flat washer)
111
6035
5/16" Flat Washer
5/16" Lock Washer
G1
Other Parts
4 x Swing Bracket