KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual page 98

Step 47: Attach Tarp Frame
Part 2
C: From inside the assembly using the center holes on the (6023) Roof Sides attach 1 (6008) Tarp Upright per
side with 1 (H2) ¼ x 2"Hex Bolt (with flat washer, lock washer and t-nut) per side in the upper holes and 1 (S15)
#8 x 1-3/4" Wood Screw per side in the bottom holes. (Fig. 47.3 & 47.4)
D: On the top of the (6008) Tarp Uprights install 1 (6025) Tarp Support with 2 (S4) #8 x 3" Wood Screws.
(Fig. 47.3 & 47.4)
Fig. 47.3
Wood Parts
1 x Tarp Support 38.1 x 38.1 x 901.7mm
6025
2 x Tarp UprIght 38.1 x 38.1 x 336.6mm
6008
Tarp Support
38.1 x 38.1 x 901.7mm
Roof Side
15.9 x 82.6 x 1019.2mm
Fig. 47.4
flat
washer
lock
washer
H2
Hardware
2 x ¼ x2"Hex Bolt (with flat washer, lock washer and t-nut)
H2
2 x #8 x 1-3/4" Wood Screw Screws
S15
2 x #8 x 3" Wood Screw
S4
98
6025
S4
S15
S4
#8 x 3" Wood Screw
X2
Tarp Upright
38.1 x 38.1 x 336.6mm
X2
6008
1/4"
t-nut
6023