KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual page 128

Step 68: Sand and Water Table Assembly
Part 4
H: Place the Sand and Water Insert into the opening of the assembly then tighten all the bolts.
I: Secure the Sand and Water Insert to the assembly using 8 (S37) #7 x 5/8" Pan Screws as shown in. (Fig.68.8
& 68.9 & 68.10)
J: Insert plugs into the drain holes and put the shovel into the Sand and water Insert. Place the seat over the
Sand and Water Insert. (fig. 68.10)
Fig. 68.8
Sand and
Water Insert
Fig. 68.10
x 8
S37
seat
Plug
Fig. 68.9
S37
Shovel
Sand and
Water Insert
Hardware
8 x #7 x 5/8" Pan Screws
S37
128
Other Parts
1 x 3 in 1 Bench set ( 1 x Shovel
2 x Plug 1 x Seat
1 x Sand and Water Insert )
B