KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual page 136

Step 74: Attach Flange Assembly to Adventure Tower
Part 2
D: Place (8934) SL Gusset centred and tight to (6005) Slide Block and attach to Flange Assembly with 2 (S6)
#12 x 1" Pan Screws. (Fig. 74.3 & 74.4)
E: Pre-drill pilot hole with a 3/16" (4.8mm) drill bit then attach (8934) SL Gusset to (6005) Slide Block with 1
(WL5) 1/4 x 2-1/2" Wafer Lag (with flat washer). (Fig. 74.3 & 74.4)
Fig. 74.4
6005
Centred
Wood Parts
1 x SL Gusset 31.8 x 76.2 x 400mm
8934
x 2
S6
WL5
flat washer
2 x
S6
1 x
WL5
Fig. 74.3
8934
Hardware
#12 x 1" Pan Screws
1/4 x 2-1/2" Wafer Lag (with flat washer)
136
Flange
Assembly
8934
6005