Glider Assembly - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 84: Glider Assembly
A: Attach 1 Space Glider Handle to the Space Glider Body using 1 (G25) 5/16 x 7-1/4" Hex Bolt (with 2 flat
washers and 1 lock nut). Repeat for the second Space Glider Handle. (fig. 84.1)
B: Install 2 Glider Rope with Chains into each Space Glider Handle using 2 - 5/16" Flat Washers and 1 Lock
Nut per rope. (fig. 84.1)
Fig. 84.1
Space Glider
Body
Warning! Bolt must not exceed
1/2 thread past the nut
5/16 Flat
Washer-Zinc
5/16 Lock
Nut
5/16 x 7-1/4
Hex Bolt
Hardware
2 x 5/16 x 7-1/4" Hex Bolt
G25
(5/16" flat washer x 2, 5/16" lock nut)
8 x 5/16" Flat Washer
4 x 5/16" Lock Nut
Glider Rope
and Chain
Space Glider Handle
146
5/16 Flat
Washer-Zinc
5/16 Lock Nut
5/16 Flat
Washers
5/16 Lock
Nuts
Other Parts
2 x Space Glider Handle
1 x Space Glider Body
1 x Glider Rope and Chain (pkg of 4)