KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual page 69

Step 26: Large Roof Assembly
Part 2
C: Place 1 Roof Support Assembly against one side so the peaks meet and the ends of the roof supports are
flush with the ends of the roof panels. Attach with 6 (S11) #8 x 2" Wood Screws. (fig. 26.4)
D: Attach the second Roof Support Assembly on the opposite side, peaks to meet and ends are flush with 6
(S11) #8 x 2" Wood Screws. (fig. 26.4)
Fig. 26.4
Flush
2639
Flush
S11
S11
Hardware
12 x #8 x 2" Wood Screw
S11
69
Large Roof
Support
Assembly
Flush
2644
Flush
Large Roof
Support
Assembly