Clock Assembly - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 13: Clock Assembly
A: From the back of the Base Clock insert the Clock Adapter then from the front of the Base Clock place the Hour
Hand over the Clock Adapter making sure they line up properly. Press the Minute Hand over the Hour Hand and
connect with the Clock Screw. (fig. 13.1)
B: On the Front of the Assembly place Clock Assembly centred under window of the Slide Side (2655) Upper
Window Insert then with a helper attach through insert and into each (2717) Clock Block with 4 (S2) #8 x 1-1/2"
Wood Screw, 2 per block. (fig. 13.2, 13.3 and 13.4)
Do not over tighten screws.
Fig. 13.1
Side View
Clock
Adapter
2717
2655
Fig. 13.3
Outside View
Base Clock
Wood Parts
2 x Clock Block 3/4 x 1-3/4 x 9-3/4"
2717
Hour Hand
Clock
Screw
Minute Hand
Base Clock
4 x
Fig. 13.2
2655
Fig. 13.4
Inside View
S2
Hardware
#8 x 1-1/2" Wood Screw
S2
47
Front
2717
Clock
Assembly
2655
Other Parts
1 x Base Clock
1 x Clock Subset
1 x Clock Adapter
1 x Hour Hand
1 x Minute Hand
1 x Clock Screw