KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual page 109

Step 57: Tunnel Frame Assembly
Part 2
B: Place the (6036) Tire Joist in between the (6035) Tunnel Side Joists with Swing Hangers at the top. (fig. 57.3)
C: Place 1 (6040) Tunnel End at each end of the joists so that the (6036) Tire Joist fits into the cut outs (fig.57.3).
Attach (6040) Tunnel Ends to (6036) Tire Joist using 3 (S4) #8 x 3" Wood Screws per end and then attach (6035)
Tunnel Side Joists to (6040) Tunnel Ends with 4 (S4) #8 x 3" Wood Screws per side making sure to use the inside
holes as shown in fig. 57.3.
Make sure assembly is square before proceeding to the next step.
Fig. 57.3
S4
S4
Wood Parts
2 x Tunnel End 31.8 x 82.6 x 367mm
6040
6035
Swing Hangers
at the top
S4
14 x
6036
Hardware
#8 x 3" Wood Screw
S4
109
S4
6035
6040
S4
S4