Tnr Brace Assembly - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 79: TNR Brace Assembly
A: Attach (8965) TNR Upright to (8963) TNR Ground Brace with 1 (H8) 1/4 x 4-1/4" Hex Bolt (with lock washer,
flat washer and t-nut) in the top hole. Make sure both boards are square then attach with 1 (S11) #8 x 2" Wood
Screw. (Fig. 79.1)
Fig. 79.1
8965
1/4"
T-Nut
Wood Parts
1 x TNR Ground Brace 31.8 x 76.2 x 819.2mm
8963
1 x TNR Upright 31.8 x 76.2 x 514.4mm
8965
1/4" Flat
1/4" Lock
Washer
Washer
H8
S11
Hardware
1 x #8 x 2" Wood Screw
S11
1 x 1/4 x 4-1/4" Hex Bolt (1/4" lock washer, 1/4" flat washer, 1/4" t-nut)
H8
141
8963