Attach Gable Dormer To Roof - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 30: Attach Gable Dormer to Roof
A: On the outside of the Large Roof Assembly on (2644) Front Roof Panel, on the 5th siding down, place (2688)
Dormer Cleat centred on the panel (over the middle inside slat) then attach with 2 (S11) #8 x 2" Wood Screws.
Make sure the screws go into the siding and the slats. (fig. 30.1)
B: Place completed Gable Dormer Assembly over (2688) Dormer Cleat and attach with 2 (S11) #8 x 2" Wood
Screws (fig. 30.2 and 30.3)
Fig. 30.1
Large Roof
Assembly
Fig. 30.3
2644
Wood Parts
1 x Dormer Cleat 1-1/4 x 3 x 12-3/4"
2688
2688
Inside slat
5th
Siding
S11
4 x
S11
SIZE DWG. NO.
Dormer Roof Prep
A
SCALE:1:50
WEIGHT:
Use 2 -#8 x 2" Wood Screws to attach to Dormer Cleat
2644
S11
Gable Dormer
Assembly
Large Roof
Assembly
Hardware
#8 x 2" Wood Screw
REV.
SHEET 3 OF 3
73
Fig. 30.2
S11
Gable Dormer
Assembly
Notice Sky Gable
on this side of Roof
Assembly
SIZE
DWG. NO.
A Dormer R
SCALE:1:50
WEIGHT: