Attach Rocks To Climbing Wall - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 54: Attach Rocks to Climbing Wall
A: Alternating colours and shapes, attach 1 rock to each rock board using 1 (PB2) ¼ x 1-1/4" Pan Bolt (with ¼"
lock washer, 3/16" flat washer and ¼" barrel nut) and 1 (S10) #8 x 1" Pan Screw per rock. (Fig. 54.1 & 54.2 &
54.3)
The Pan Screw is placed in the hole beneath the Pan Bolt.
Make sure all hardware is used to secure each rock properly.
Fig. 54.1
Fig. 54.2
Hardware
9 x #8 x 1" Pan Screw
S10
9 x ¼ x 1-1/4" Pan Bolt (with ¼" lock washer, 3/16" flat washer and ¼" barrel nut)
PB2
Fig. 54.3
¼" barrel
nut
105
PB2
¼" lock
washer
S10
3/16" flat
washer
rock
Other Parts
9 x Rocks