Install Gussets - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 46: Install Gussets
Part 1
A: On the back side of the assembly place 2 (6006) Back Gussets so they meet tightly together to form a point.
Center the (6006) Back Gussets on the inside of the (6034) Floor Back making sure the other ends are flush to the
Long Posts. (Fig.46.1)
B: From the outside, attach the (6006) Back Gussets at the top using 2 (S15) #8 x 1-3/4" Wood Screws. Attach the
(6006) Back Gussets to the (6002) Long Posts using 1 (S4) #8 x 3" Wood Screw per side in the upper hole and 1
(S11) #8 x 2" Wood Screw per side in the bottom holes. (Fig.46.2)
Fig. 46.1
back side
new image for page 79, fig. 35.1
Fig. 46.2
Long Post
31.8 x 82.6 x 1968.5mm
Wood Parts
2 x Back Gusset 31.8 x 82.6 x 396.9mm
6006
S15
new image for page 79, fig. 35.1
S15
S4
S11
2 x
2 x
Floor Back
2 x
23.8 x 139.7 x 596.9mm
center both on the
inside of Floor Back
6034
6006
flush to the
Long Posts
6002
6006
Hardware
#8 x 3" Wood Screw
S4
#8 x 2" Wood Screw
S11
#8 x 1-3/4" Wood Screws
S15
95