Attach Cafe Canopy To Fort - KidKraft BEAR CAVE LODGE Installation And Operating Instructions Manual

Step 17: Attach Cafe Canopy to Fort
A: Feed Cafe Canopy Frame through the pocket of the Cafe Canopy. (fig. 17.1)
B: With a helper hold the Canopy against the fort, centred on the (2618) Front Back Panel shown on the Fort
Guide, make sure the Cafe Canopy is smooth and tight then attach to the panel with 1 (S5) #8 x 1/2" Pan Screw
(with #8 flat washer), measure 1-1/2" down from the first screw then attach a second screw and washer. Follow
measurements as shown in fig. 17.2 for remaining screws and washers. Measurements must be exact.
C: Hold the Cafe Canopy Frame against the panel and attach with 1 (S6) #12 x 1" Pan Screw per side. (fig. 17.2)
Fig. 17.1
Cafe Canopy
Frame
1-1/4"
Start on
this side
1-1/2"
S6
Cafe Canopy
Frame
x 1 per
side
Cafe Canopy
5"
15"
Hardware
8 x #8 x 1/2" Pan Screw (#8 flat washer)
S5
2 x #12 x 1" Pan Screw
S6
15"
52
Fig. 17.2
1-1/4"
S5
w/#8 flat
washer
x 8
2618
Cafe Canopy
Other Parts
1 x Cafe Canopy Frame
1 x Cafe Canopy