Attach Access Ladder/Rope Wall Assembly - KidKraft Cedar Summit Lookout Extreme Installation And Operating Instructions Manual

Step 15: Attach Access Ladder/Rope Wall Assembly
Part 1
A: Place Access Ladder/Rockwall Assembly from Step 3 against (083) Wall Panel Back, flush to the outside
edge and flush to the top of the floor boards then attach with 3 (WB9) 5/16 x 2-1/8" Wafer Bolt (with flat washer).
(fig. 15.1 and 15.2)
Fig. 15.1
Access Ladder/
Rockwall Assembly
Fig. 15.2
5/16" Flat
Washer
Access Ladder/
Rockwall Assembly
083
Floor Boards
WB9
3 x 5/16 x 2-1/8" Wafer Bolt (5/16" flat washer)
WB9
083
5/16" Flat
Washer
Hardware
39
Flush
Flush
5/16" Flat
Washer