Step 17: Attach Rocks to Rock Board
A: Place 1 Rock on each (1777) and (1778) CE Rock Board A & B (fig. 17.1 and 17.2) and attach using 1 (PB2)
1/4 x 1-1/4" Pan Bolt (with lock washer, flat washer and barrel nut) and 1 (S10) #8 x 1" Pan Screw per rock. The
rocks can be attached in any order. (fig. 17.1)
The screw must be in the hole directly under the Pan Bolt, it will stop the rock from spinning. (fig. 17.2)
Note: Make sure all hardware is used to secure each rock properly.
Fig. 17.1
Hardware
5 x
1/4 x 1-1/4" Pan Bolt
PB2
(with 1/4" lock washer, 3/16" flat washer, barrel nut)
5 x
8 x 1" Pan Screw
S10
34
Fig. 17.2
1/4" Barrel
Nut
Rock
3/16" Flat
Washer
1/4"Lock
Washer
PB2
S10
Other Parts
5 x Rocks
europecustomerservice@kidkraft.com