Safety Notes; Symbols Used; Safety Notes And Hints - Proceq ZAA2600 Instruction Manual

ZAA2600 - Manual

1 Safety notes

1.1 Symbols used

This note comprises instructions needed to follow directions, specifications, proper
working procedure and to avoid data loss, damage or destruction of the instrument.
This note signifies a warning about dangers to life and limb if the apparatus is handled
improperly. Observe these notes and be particularly careful in these cases. Also inform
other users on all safety notes. Besides the notes in this instruction manual the
generally applicable safety instructions and regulations for prevention of accidents
must be observed.

1.2 Safety notes and hints

It is strictly forbidden to open the housing of the product. If not observed, all the
guarantee and liability claims to Proceq SA will be void.
Place the device on a solid, even surface before operation.
Ensure that the separator (power socket) is accessible and that the instrument can be
separated from the power supply at any time.
Never touch any moving parts during operation.
The side panels must always be mounted during operation.
Always wear safety glasses during operation.
Only connect the product to alternating current of a voltage of 100 – 240 V at 50 to 60
Hz. The voltage must correspond to the information given on the identification plate of
the apparatus. The device may only be connected to sockets with a protective earth
conductor.
Never use a damaged power cable. Only use power cable with protective earth
conductor. Removable power cables must not be replaced by an insufficiently rated
power cable. Only use the power cable provided by the manufacturer.
The product is constructed in accordance with the state of the art and is safe in use.
However, dangers may arise from this apparatus if it is used improperly or used
otherwise as intended by the manufacturer.
Depending on the coating material used, the test may only be carried out in a ventilated
environment.
Das product is a multi-function device and is exclusively intended for use in various
functions defined in this manual. Any other use is considered as being not in
accordance with the intentions of the manufacturer and is conducted at the user's own
risk. The manufacturer is not liable for any resulting damages.
Always unplug the power cable before assembling and/or converting the unit.
Every person operating or maintaining the product must have read and understood this
instruction manual in its entirety, in particular the safety precautions and warnings.
Unauthorized modifications and changes of the product are not permitted.
Reproduction without permission is not allowed.
Before lifting or moving the apparatus, the glass plate must be removed to reduce the
total weight. Tilting the device can lead to falling out of the glass plate.
All maintenance and repair not explicitly allowed and described in this manual, shall
only be carried out by Proceq SA or an authorized Proceq partner, failure to comply
voids warranty.
23. September 2021 © Copyright 2021, PROCEQ SA 7