Assembly Of Zaa2600.Ha - Proceq ZAA2600 Instruction Manual

ZAA2600 - Manual

5.1.2 Assembly of ZAA2600.HA

Before the first use the apparatus has to be assembled or converted for use with the desired
options. ZAA 2600 Basic unit:
Remove the four black rubber feet.

Remove the screws of the adjustable start stop (1) and end stop (2).

Remove the side panels (17) by loosening and removing the Allen screws (18).

Assemble the clamping device (5) and holding device (8) with the delivered Allen screws.

Reassemble both side panels (17), the one with

the slit on the right side, the other on the left side.
Refasten the screws of the adjustable start (1)

and end stop (2).
Open the clamping device (5), by pressing the release lever (4) and the clamping grip (3)

together until you hear a click, then tilt the clamping grip (3) backwards.
Place the isolation plate (20) into the device.

23. September 2021 © Copyright 2021, PROCEQ SA 25