Table of Contents
Advertisement
2
Safety information
2.1 Symbols used
This note comprises instructions needed to follow directions, specifications,
proper working procedure and to avoid data loss, damage or destruction of
the instrument.
This note signifies a warning about dangers to life and limb if the apparatus
is handled improperly. Observe these notes and be particularly careful in
these cases. Also inform other users on all safety notes. Besides the notes
in this instruction manual the generally applicable safety instructions and
regulations for prevention of accidents must be observed.
2.2 Safety notes and hints
It is strictly forbidden to open the housing of the Proceq ZAA 2600. If
not observed, all guarantee and liability claims to Proceq SA will be void.
Place the device on a solid, even surface before operation and ensure that
the separator (power socket) is accessible and that the instrument can be
separated from the power supply at any time.
Never touch any moving parts during operation.
The side panels must always be mounted during operation.
Do not lean over the unit during operation.
Always wear safety glasses during operation.
Only connect the Proceq ZAA 2600 to alternating current of a voltage of 100
– 240 V at 50 to 60 Hz. The voltage must correspond to the information
given on the identification plate of the apparatus. The device may only be
connected to sockets with a protective earth conductor.
Never use a damaged power cable. Only use power cable with protective
earth conductor. Removable power cables must not be replaced by an
insufficiently rated power cable. Only use the power cable provided by the
manufacturer.
The Automatic Scrub Tester Proceq ZAA 2600 is constructed in accordance
with the state of the art and is safe to operate. However, there is always risk
when the instrument is handled improperly or differently than intended by the
manufacturer.
Depending on the abrasives used, the test may only be carried out in a
ventilated environment.
Always unplug the power cable before assembling and/or converting the
unit.
Scrub or crock abrasion tests may produce dust through abrasion. If
necessary, appropriate safety related measures must be provided by using a
suction device.
The Proceq ZAA 2600 is a multi-function device and is exclusively intended
to use in various functions defined in chapter 1 of this manual. Any other use
Page 7
Advertisement
Table of Contents
