ZAA2600 - Manual
10.1.9 Movement lock
The movement lock blocks all movement commands of the drawing unit (20). It can be
activated and deactivated by tapping the lock button.
If the button is in the „armed"
If the button is in the „locked"
back" are locked.
The „locked" setting prevents the moving of the drawing unit (20) when touching the screen
accidentally.
23. September 2021
If you see this screen, the device is in film application
mode. Go back to the scrubbing mode as follows:
Open the menu
Mode", then tap „Scrubbing".
setting, all functions are active.
setting, the functions „Draw", "Manual forward" and "Manual
© Copyright 2021, PROCEQ SA
, select „Setup"and „Machine
63