Turning The Glass Plate Of A Zaa2600.A - Proceq ZAA2600 Instruction Manual

ZAA2600 - Manual

11 Turning the glass plate of a ZAA2600.A

Make sure that the adjustable start stop (1) and the drawing unit (20) are positioned in the

very back of the device and that the clamping device (5) is released.
Lift the weight (7) and hinge it into the top position of the holding device (8).

Carefully lift the glass plate at the front edge and pull it out of the apparatus.

Turn the plate over and carefully place it back into the holder with the required side facing

up.
23. September 2021 © Copyright 2021, PROCEQ SA 71