Table of Contents
Advertisement
1
Description of device
The ZCC 2087 is an ergonomically designed cross-cut tester with a special flexible
cutting head with exchangeable cutting tool for evaluation of adhesion of single- or
multi-coat systems.
2
Safety information
2.1 Symbols used
This note comprises instructions needed to follow directions, specifications,
proper working procedure and to avoid data loss, damage or destruction of
the instrument.
This note signifies a warning about dangers to life and limb if the apparatus
is handled improperly. Observe these notes and be particularly careful in
these cases. Also inform other users on all safety notes. Besides the notes
in this instruction manual the generally applicable safety instructions and
regulations for prevention of accidents must be observed.
2.2 Safety notes and hints
The ZCC 2087 is exclusively intended for the evaluation of adhesion of single-
or multi-coat systems. Any other use is considered as being not in
accordance with the intentions of the manufacturer and is conducted at the
user's own risk. The manufacturer is not liable for any resulting damages.
Unauthorized modifications and changes of the ZCC 2087 are not permitted.
Reproduction of the ZCC 2087 without permission is not allowed.
Zehntner GmbH Testing Instruments refuses all warranty and liability
claims for damages caused by usage of the ZCC 2087 in combination with
non-original accessories, or accessories from 3
All local safety regulations apply for the operation of the ZCC 2087.
rd
Page 5
party suppliers.
Advertisement
Table of Contents
