Mounting The Friction Finger Set B - Proceq ZAA2600 Instruction Manual

ZAA2600 - Manual
3) Clamp the rubbing cloth
smoothly.
If your friction finger set does not look like picture 3, meaning one corner of the
ACC1353 rubbing cloth (circled in red) does not face the holder screw (circled in
green), you need to redo step 2.
The test load of 22 N will only be reached if the knurled nut is mounted.
To avoid ejection of weights (accidentally falling down) they have to be screwed to the
holder.

8.4.2 Mounting the friction finger set B

1) Compress the ring to enlarge it's
diameter and push it over the
.
rubbing cloth
The test load of 9 N will only be reached if the knurled nut is mounted.
To avoid ejection of weights (accidentally falling down) they have to be screwed to the
holder.
23. September 2021
4) Slide on the weight and screw it in place.
2) Slide on the weight and screw it in
place.
© Copyright 2021, PROCEQ SA 50