ZAA2600 - Manual
10.3 Using layouts
Layouts are memory slots with a custom set name which hold a saved application profile
(drawing speed and length). Using layouts for recurring tasks, these parameters can easily
be saved and recalled at a later point.
There are 10 layout slots available. Layout settings can be changed as follows:
10.3.1 Selecting a layout
The current layout can be selected by tapping the layout field on the main screen.
10.3.2 Editing the selected layout
To edit the currently selected layout, choose „Selected layout" in the menu. The parameters
„Name", „Speed" and „Length" can be adjusted by tapping the values, entering the desired
adjustment and confirming it with "OK".
Return to the main screen by tapping the „Home"
button.
The speed and length settings can also be changed directly from the home screen. To adjust
the values tap on the speed, respectively on the length field and either use the slider or the
and
buttons. These settings will be saved automatically in the selected layout.
10.3.3 View and edit all layouts
To show all existing layouts, select „All layouts" in the menu. A list of all saved layouts will be
displayed. The active layout will be shown as "selected".
To change the name or settings of a layout, tap the relevant entry in the list. The values can
then be changed in the same way as described in chapter 10.3.2.
10.4 Motor settings
Various settings for the drive motor can be changed via „Settings" -> „Motor settings" in the
menu.
23. September 2021
© Copyright 2021, PROCEQ SA
66