Safety And Liability; Getting Started; Resipod Basics - Proceq Resipod Family Operating Instructions Manual

1 Safety and Liability

Safety and Usage Precautions
This manual contains important information on the safety, use and maintenance of the Resipod .
Read through the manual carefully before the first use of the instrument . Keep the manual in a safe
place for future reference .
Liability
Our "General Terms and Conditions of Sale and Delivery" apply in all cases . Warranty and liability
claims arising from personal injury and damage to property cannot be upheld if they are due to one
or more of the following causes:
-
Failure to use the instrument in accordance with its designated use as described in this
manual .
-
Incorrect performance check for operation and maintenance of the instrument and its
components .
-
Failure to adhere to the sections of the manual dealing with the performance check,
operation and maintenance of the instrument and its components .
-
Unauthorized structural modifications to the instrument and its components .
-
Serious damage resulting from the effects of foreign bodies, accidents, vandalism and force
majeure .
All information contained in this documentation is presented in good faith and believed to be
correct . Proceq SA makes no warranties and excludes all liability as to the completeness and/or
accuracy of the information .
Safety Instructions
The instrument is not allowed to be operated by children or anyone under the influence of alcohol,
drugs or pharmaceutical preparations . Anyone who is not familiar with this manual must be
supervised when using the instrument .

2 Getting started

Note: When shipped, battery packs are not fully charged . Prior to use, please
charge the battery completely . To prevent the battery from damage, avoid deep-
discharging or storing it long-term when empty . Store the instrument at room tem-
perature and charge the battery fully at least once a year .

2.1 Resipod Basics

Charging the Resipod
The battery status symbol will be displayed when the accumulator is at 10% of its capacity . In this
case it is still possible to make a large number of measurements, but it is advisable to recharge
the battery by connecting the unit to a wall adaptor or a PC via the USB port . A complete charging
cycle will last approximately 6 hours . Autonomy is > 50 hours .
Operation - Power ON / OFF
Press the "Hold" button on the side of the Resipod to power on .
Press and hold the button for >2 s to shut the unit off (auto shutdown after 10 min . of stand-by)
© 2017 Proceq SA 3