Assembly Of The Zaa2600.C - Proceq ZAA2600 Instruction Manual

ZAA2600 - Manual
(4)
Move the start stop (1) backwards and the end stop (2) forward as far as possible. Fasten

their screws.
To protect persons and apparatus, proper care must be taken when lifting or carrying it.
It is recommended to hold and carry the ZAA 2600 on both sides of the housing.
Always remove the sample tray before lifting or tilting the device.

5.1.4 Assembly of the ZAA2600.C

Before the first use the apparatus has to be assembled or converted from another
application:
Check if the four rubber feet are mounted.

Place the glass plate (3) with the required side facing up in the unit.

Remove the start stop (1) and the end stop (2).

Loosen the fixing screws of the side panels (16) and remove the side panels (15).

Mount the tool holder-side parts (5) and the tool holder bridge (4).

23. September 2021
(6)
(2)
© Copyright 2021, PROCEQ SA
(1)
(3)
29