ZAA2600 - Manual
10.6 Emergency Stop function
Pressing the Emergency Stop button (11) immediately stops the motor. The power supply of
the motor is interrupted so that the drawing unit (20) can be moved by hand.
the Emergency Stop:
23. September 2021
The touch screen and control unit of the ZAA 2600
remain active since only the power supply is interrupted.
To unlock the Emergency Stop button, turn it
counterclockwise.
The following message will be displayed after unlocking
The Zero position must be reset. Move the drawing unit
(20) to the desired starting position and press the „Zero"
button.
© Copyright 2021, PROCEQ SA
70